For Ball CCD camera

I. Market Application

This product is developed and designed by 3KM specifically for the needs of unmanned aerial vehicle monitoring and supplementary lighting. It is 27.4mm wide, 18.6mm light outlet, 53.6mm long, less than 50g in weight, with an output power of 2W. The longest effective distance measured can reach 600m. It is currently the smallest and lightest long-distance zoom infrared laser lighting module in the industry.

500m Micro infrared laser lighting night vision monitoring system

It has the characteristics of full intelligence, plug and play, intelligent dimming, autofocus, and other technologies. It has an industrial grade working temperature range of -40 ℃ to+85 ℃, meets the FDA and IEC Class 3B laser safety certification. It adopts the patented technology of micro lens laser homogenization with no light loss, no noise, no vibration, no jitter, and no speckle. The light spot is uniform and the image quality is transparent, which can be called a drone monitoring supplementary light.

On site testing results of a miniature 500m Micro infrared laser lighting module at a distance of 500m

On site testing results of a miniature 500m Micro infrared laser lighting module at a distance of 600m

II. Product Features

• Photosensitive automatic dimming, passive dimming and remote background dimming a variety of dimming methods

• Intelligent synchronous zoom, and the camera Angle automatically adaptation, intelligent adjustment of light intensity, preset support system, synchronous electric zoom 2.0 ° ~ 70 ° continuous adjustable, perfect adaptation of in market surveillance camera, achieve perfect lighting effect;

• Perfectly match monitoring equipment of different brands and models, plug and play, without Angle matching;

• The system software can monitor the working state of laser and control it intelligently.

• The light energy utilization rate is above 90%;

• Intelligent temperature control protection, coaxial circulation convection air cooling design, each product all through the design of thermal simulation, body temperature than the environment temperature 5 ℃ to 10 ℃ higher ;

• Patented technology of laser homogenization for microlens with no light loss, no noise, no jitter, no vibration and no speckle (3KM-AOT);

• Near Angle to long Angle zoom speed up to 2 seconds

III. Technical Parameters

Note: the infrared laser illumination module parameters are subject to the quotation scheme, subject to change without prior notice.

IV. Overall Dimensions

V. Interface Definition

VI. Notes

• The Infrared Laser Lighting Modules belong to the Class 3B non-visible light laser. While the laser light is on, back-light looking at or observing laser light beam with optical instrument is strictly prohibited.

• While the Infrared Laser Lighting Module is on, flammable objects are strictly prohibited within 100cm in front of the lens to prevent fires.

• The Infrared Laser Lighting Module should be installed where people could not look at it directly or it should be a long enough distance from where people could look directly. Manufactures should choose the Laser radiation power according to its actual application environment, in order to avoid hurting people's eyes.

• Manufactures using our Infrared Laser Lighting Modules should put labels warning of laser radiation.

• When device fault occurs, please contact with our qualified maintenance personnel for service rather than disassemble it at your own discretion, otherwise warranty will be end of the moment you disassemble it.